Focusrite Clarett 4Pre USB User Manual

15
Device Settings tab of Focusrite Control. The two devices must be set to operate at the same
sample rate.
The additional inputs realised by use of the optical port may be routed using Focusrite Control
in exactly the same manner as the other inputs. The additional inputs can also form part of any
musician’s headphone mix, as required.
If an ADAT-equipped mic pre-amp is not available, a satisfactory method of recording drums with
just four mics and the Clarett 4Pre USB is shown below:

Focusrite Clarett 4Pre USB Specifications

General

Gain	57 dB
Control type	Buttons, Rotary
Sample rates	44.1 - 192 kHz
On/off switch	Yes
Phantom power	48 V
Product color	Black
LED indicators	Power, Signal strength, USB
Frequency range	20 - 35000 Hz
Built-in display	No
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan
Total Harmonic Distortion (THD)	0.001 %
Windows operating systems supported	Windows 10, Windows 7, Windows 8.1
USB port type	USB Type-C
USB ports quantity	1
6.35 mm (1⁄4-inch) input	4
6.35 mm (1⁄4-inch) output	6
DC output voltage	12 V

Weight and Dimensions

Depth	192 mm
Width	222 mm
Height	63.5 mm
Weight	1350 g