17
Saving and Loading Presets
If you want, you can store all the mixer parameters as a preset and reload it at a later time. You can
store as many presets as you wish. Click on File > Save As… to open a standard Save As (Windows)
or Save a snapshot le (Mac) dialogue box. Navigate to a suitable location and Save in the usual
manner. The Preset files have the filename extension *.forte.
Loading a previously-saved Preset is the reverse procedure; click on File > Open, navigate to the
required file and click Open.
Restore Factory Defaults
Clicking on File > Restore Factory Defaults resets all Forte Control parameters to default values.
This sets the input levels at minimum, output levels at -30 dBFS and all Digital Monitor Mixer levels
at unity gain. See “Appendix” on page 24 for full list of factory default settings.
To Next Page
Loading...
