FONESTAR MPX-4088 - FBC Output Assign; AUTOMIXER FUNCTION

FBC Output Assign
1
0.- Local Output: output channels corresponding to the inputs selected for processing.
1
1.- Network output: broadcast output channels corresponding to the inputs to be processed.
T
he configuration of the FBC is manual. It consists in finding the resonance frequencies to be eliminated.
O
nce the frequencies have been found, the system will automatically decide on the suitable filters.
In order to configure the FBC, the microphones must be connected and open. The FBC (4) fader must be
moved until feedback is reached. When the system detects feedback, the indicators 1 to 24 turn red for
static filters and green for dynamic filters.
AUTOMIXER
The AutoMixer function reduces the level of a microphone when it is not being used, ideal for conference
rooms, theatres, etc.
This function can be combined with the Ducker function, by doing so also establishing priority.
1.- Local input: selection of input channels to be processed.
Active Time
2.- ON/OFF: activates/deactivates the attenuation time.
3.- Sets the attenuation time.
- 15 -
E
N