Need help?Do you have a question about the FONESTAR MPX-4088 and is the answer not in the manual?
General| Brand | FONESTAR |
|---|---|
| Model | MPX-4088 |
| Category | Matrix Switcher |
| Language | English |
Ensures safe operation by checking power supply and handling connections properly to avoid hazards.
Highlights essential precautions during installation and operation to prevent injury or damage.
Details the RD ports for digital audio and control signals with specific models.
Connects audio sources to inputs 1-8 and remote controls to specific RD ports.
Connects MPX-400MIC microphones to RD ports 9/10 or 11/12.
Connects zone outputs to amplifiers and controls volume via software or remote controls.
Connects MPX-420V/MPX-430VS controls to RD ports for zone management.
Provides essential advice for making safe and effective audio system connections.
Explains connecting PC to matrix via RJ-45 for configuration in a daisy-chain setup.
Details connecting PC to matrix via router for configuration in a star network.
Guides on connecting to the device via IP and MAC, and setting device IDs.
Describes automatic detection of matrices connected to a router in star network mode.
Provides access to real-time editing of input signal processing parameters.
Details the expander/gate settings for dynamic signal processing.
Explains EQ settings, filters, and gain adjustments for audio shaping.
Details compressor settings like threshold, ratio, attack, and release for dynamic control.
Explains how to allocate input channels to output channels using the matrix interface.
Allows attenuation of channels based on priority signal level for background music.
Manages presets by importing from or exporting to the matrix or PC.
Details the LCD display and volume/zone allocation controls.
Guides on connecting the PC and initiating the firmware update process.
Guides on setting IP address, subnet mask, gateway, and password.
To Next Page