36
Step 6
Read Your Result
The result of your blood glucose test will appear
after the monitor counts down to 0. This blood
glucose result will automatically be stored in the
memory.
Step 7
Eject the used test strip and remove the lancet
To eject the test strip, point the strip at a disposal container for sharp
objects. The monitor will switch itself off automatically after the test
strip is ejected.
Always use caution when removing the lancet and follow the in-
structions in the lancing device insert when removing the lancet.
WARNING
The used lancet and test strip may be biohazards. Please discard them
carefully according to your local regulations.
To Next Page
Loading...
