Ford FUSION Owner's Handbook

TECHNICAL SPECIFICATIONS
Vehicle fluids
SpecificationRecommended fluidItem
WSS-M2C913-BFord or Motorcraft
Formula E SAE 5W-30
Engine Oil
1
Engine oil
WSS-M2C195-AFord or Motorcraft
Power Steering Fluid
Power steering fluid
WSS-M97B44-DMotorcraft SuperPlus
Antifreeze
Antifreeze
CAUTION
Do not use oils which do not meet the specifications or requirements.
Use of unsuitable oil may lead to engine damage which is not covered by
the Ford Warranty.
1
You can use an alternative SAE 5W-30 engine oil, providing it meets the
specification defined by WSS-M2C913-B.
Note: If you operate your vehicle in temperatures below -20°C, you must
not use SAE 10W-40 engine oil.
Topping up the oil: If you are unable to find an oil that meets the
specification defined by WSS-M2C913-B, you must use SAE 5W-30
(preferred), SAE 5W-40 or SAE 10W-40 that meets the specification defined
by either ACEA A1/B1 (preferred) or ACEA A3/B3. Using these oils can result
in longer engine cranking periods, reduced engine performance, reduced
fuel economy and increased emission levels.
Capacities
Capacity in litres
(gallons)
ItemVariant
MAX markPower steering systemAll
2.5 (0.5)
Windscreen and rear
window washer system
All
45 (9.9)Fuel tankPetrol
122
Maintenance

Ford FUSION Specifications

General

Brand	Ford
Model	FUSION
Category	Automobile
Language	English