EasyManuals Logo

Ford FUSION Owner's Handbook

Ford FUSION
190 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
PRINCIPLE OF
OPERATION
The engine immobiliser is a theft
protection system that prevents
someone from starting the engine
with an incorrectly coded key.
CODED KEYS
Note:
Do not shield your keys with
metal objects. This may prevent the
receiver from recognising your key
as a valid one.
Note:
Have all of your remaining
keys erased and recoded if you lose
a key. Ask your dealer for further
information. Have replacement keys
recoded together with your existing
keys.
If you lose a key, you can obtain a
replacement from your Ford Dealer.
If possible, provide them with the key
number from the tag provided with
the original keys. You can also obtain
additional keys from your Ford
Dealer.
ARMING THE ENGINE
IMMOBILISER
The engine immobiliser is armed
automatically a short time after you
have switched the ignition off.
The indicator in the instrument cluster
will flash to confirm that the system
is operating.
DISARMING THE ENGINE
IMMOBILISER
Switching on the ignition disarms the
system if the correct code is
recognised. The indicator
illuminates for approximately three
seconds and then extinguishes.
If the indicator illuminates constantly
for one minute or flashes for
approximately one minute and then
repeatedly at irregular intervals, the
system did not recognise the key
code or a system fault is present.
Remove the key and try again.
If the engine does not start, a system
malfunction has occurred. Have the
system checked by an expert
immediately.
34
Engine immobiliser

Table of Contents

Other manuals for Ford FUSION

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ford FUSION and is the answer not in the manual?

Ford FUSION Specifications

General IconGeneral
BrandFord
ModelFUSION
CategoryAutomobile
LanguageEnglish

Related product manuals