Main beam indicator
The main beam indicator will
come on when you switch
the headlamp main beam
on. It will flash when you use the
headlamp flasher.
Oil pressure warning lamp
CAUTION
Do not resume your journey if the
oil pressure warning lamp comes
on despite the oil level being correct.
Have this checked immediately.
If the oil pressure warning
lamp comes on when you
are driving, this indicates a
malfunction. Stop your vehicle as
soon as it is safe to do so and switch
the engine off. Check the engine oil
level. See Maintenance (page 111).
Overdrive indicator
The overdrive indicator will
come on when you switch
overdrive off.
Power steering warning
lamp
If the power steering
warning lamp comes on
when you are driving, this
indicates a malfunction. You will
continue to have normal steering
(without assistance) but have this
checked as soon as possible. You
will have to use greater force to turn
the steering wheel.
Powertrain warning lamp
Vehicles with an automatic
transmission
If the powertrain warning
lamp comes on when the
engine is running, this
indicates either a malfunction or a
high transmission temperature. Stop
your vehicle as soon as it is safe to
do so and carry out the following:
1.
Select P or N and allow the
engine to idle for 10 minutes.
2. Switch the ignition off and restart
the engine.
If the powertrain warning lamp
comes on, switch the ignition off and
have the transmission checked
before continuing your journey.
If the powertrain warning lamp does
not come on, continue your journey
and have the transmission checked
as soon as possible.
Vehicles with a 5-speed
manual transmission or
Durashift EST
If the powertrain warning
lamp comes on when the
engine is running, this
indicates a malfunction. The engine
will continue to run but it will have
limited power. Have this checked as
soon as possible.
59
Instruments
To Next Page
Loading...
Need help?
General
