Select wipe interval with rotary
switch: 1 = Short time interval. 6 =
Extended time interval.
Autowipers
WARNINGS
In icy conditions, make sure that
the windscreen has been fully
defrosted before selecting
autowipers.
Switch off the autowipers
feature before entering a car
wash.
Replace the wiper blades as
soon as they begin to leave
bands of water and smears or when
they do not completely remove water
from the windscreen. If the blades
are not replaced, the rain sensor will
continue to detect water on the
windscreen. This will result in the
wipers continuing to operate
although the majority of the
windscreen is dry.
Note:
The autowipers feature is
intended for use during wet weather
conditions only and is very sensitive
to anything which touches the
windscreen near to the rain sensor.
Objects such as dirt, mist or flies
hitting the windscreen in this location
may cause the wipers to wipe even
though the windscreen is mostly dry.
Note:
The autowipers feature should
not be selected when it is snowing,
foggy or when the roads have been
salted. In these weather conditions,
select an alternative position if
necessary.
38
Wipers and washers
To Next Page
Loading...
Need help?
General
