23
© Copyright, Sunrise Tradex Corp., 2018
Thermostat
▪ Cancelling a timer :
In order to cancel a timer, you must enter the same time value set as the "ON"
setting for the "OFF" setting. For example, if your timer was set to turn on at
8:00, enter 8:00 as the value for the "OFF" setting. Pressing will conrm and
effectively cancel the timer.
▪ While in the timer setting interface, if there is no activity for 60 seconds, the display
will return to the main interface.
UP AND DOWN ARROWS
▪ Using the and arrow keys will allow you to modify a parameter or time setting.
▪ While in the main interface, using the arrow keys will allow you to increase or
decrease the temperature of the currently operating mode (cooling or heating).
SETTING
CAUTION : The setting key is intended for after-sale staff use only and is used to set
important system parameters. Homeowners should not attempt to access and change
these parameters. Doing so could cause the unit to malfunction.
▪ Short press to enter the system parameter settings. Use the arrow keys and
to alternate between parameters (P01, P02 and P03 - see table on next page for
description), then press to select the parameter you wish to modiy. Change the
values using and then press to conrm. Press to return to the main
interface. If there is no activity for 60 seconds, the display will automatically return to
the main interface.
▪ Hold this key down for 5 seconds to switch the temperature display from Fahrenheit
to Celsius or vice versa.
FAN
▪ Press this key to change the fan speed. Speeds include : Low, Medium, High and
Automatic. Each speed has a corresponding LED indicator.
▪ Hold the key down for 5 seconds to lock all the keys of the control panel. The
lock indicator should appear. Hold the key again for 5 seconds to unlock.
To Next Page
Loading...
