Fortinet FortiFone FON 80 Series - Phone; Account; Accessory

Configuration overview
l
MAC: Displays MAC address of the phone.
l
Ethernet: Displays current IP information:
l
IP Mode
l
IP address
l
Subnet Mask
l
Default Gateway
l
Primary DNS
l
Secondary DNS
l
Voice VLAN: Displays voice VLAN information:
l
VLAN Setting
l
VLAN ID
l
VLAN Priority
l
Data VLAN: Displays data VLAN information:
l
VLAN Setting
l
VLAN ID
l
VLAN Priority
Phone
Status > Phone displays the following information about the model of the phone:
l
Model: Phone model name.
l
Serial Number: Serial number of phone.
l
Software Version: Current software version installed on phone.
l
Memory Usage: Percentage of memory used. To see the total, used, and free memory (in KB) on the phone, press
the Detail soft key.
l
CPU Usage: Percentage of CPU used.
l
Storage Usage: Percentage of storage used. To see the total, used, and free storage (in KB) on the phone, press
the Detail soft key.
l
Uptime: How long the phone has been running since the last reboot.
l
Reboot Time: Displays the time the phone last rebooted.
Account
Status > Account displays the name, extension number, and status of each SIP account on the phone.
Accessory
Status > Accessory displays the status of headsets.
l
Bluetooth Headset:Shows one of the following statuses:
l
No Adapter:Shows on FON-380 phones when no adapter is detected.
l
Disabled: Shows when Bluetooth is disabled.
l
Enabled: Shows when Bluetooth is enabled but a Bluetooth headset is not connected.
l
When Bluetooth is enabled and a headset is connected, the phone displays the headset model.
FortiFone FON-x80/x80B Series 3.0.19 User Guide 16
Fortinet Inc.