Using your phone
Attended transfer
Calls can be announced to the party receiving the transfer before completing the transfer.
To perform an attended transfer
1. While on a call, press the Transfer soft key.
2. Dial the extension or phone number and press the Dial soft key.
3. Announce the call.
4. Press the Transfer soft key.
Blind transfer
Calls can be transferred without talking to the party receiving the transfer.
To perform a blind transfer
1. While on a call, press the Transfer soft key.
2. Dial the extension or phone number.
3. Press the Transfer soft key.
Three-party conference
The phone supports conferencing with two other parties.
To create a three-party conference
1. Place the first call.
2. Press the Conference soft key. The first call will be placed on hold.
3. Call the second party.
4. After the second party answers, press the Conference soft key again.
5. To place the conference call on hold, press the Hold soft key. To continue a conference that is put on hold, press
Resume.
6. To disconnect one of the parties from the conference call:
a. Press the Split soft key
b. Select the party that you want to disconnect.
c. Press the End soft key.
d. Press the Resume soft key.
7. To end the conference call completely and disconnect from both parties, press the End soft key.
Call waiting
When Call Waiting is enabled, the phone will present new calls to you while you are on a call. In order to use call waiting,
it will first need to be enabled in the FortiVoice interface.
To answer an incoming call while on a call, press the Answer soft key. The initial call will be placed on hold. For details
about how to toggle between calls, see the Hold on page 36 section.
FortiFone FON-x80/x80B Series 3.0.19 User Guide 37
Fortinet Inc.
To Next Page
Loading...
