Fortinet FortiFone FON 80 Series - Network

Configuration overview
Item Description
l
Park appearance - Allows you to monitor the selected call park slots,
informing you if there is a call parked.
Label Enter a label to display on selected programmable key.
Line Select the line to perform the selected action on.
Parameter Used to configure the value for the following types when using the FortiVoice
phone system:
l
Intercom
l
Record
l
Speed Dial
l
DTMF
Used to configure the value for the following types when using FortiVoice Cloud:
l
Intercom
l
Speed dial
Network
To configure Setting > Network parameters, the phone requires that you enter the
administrator password. The default password is 23646. The FortiVoice administrator can
change this password on the phone system in Phone System > Profile > Phone.
Setting > Network allows you to configure the following network parameters of the phone:
l
Ethernet on page 26
l
DNS on page 27
l
LLDP on page 27
l
VLAN on page 27
l
DSCP on page 28
Ethernet
Setting > Network > Ethernet allows you to configure the following settings:
Item Description
IP Mode Your choices are:
l
DHCP (default)
l
Static
When you set the IP Mode to Static, configure the following settings:
IP Address Configure IP address.
Subnet Mask Configure subnet mask.
Default Gateway Configure default gateway.
FortiFone FON-x80/x80B Series 3.0.19 User Guide 26
Fortinet Inc.