Fortinet FortiFone FON 80 Series - Page 28

Configuration overview
Item Description
Data VLAN Configure Data VLAN settings.
Manual Status Enable or disable the selected VLAN.
If enabled, configure the following settings:
l
VLAN ID - Configure the VLAN ID with a value from 1 to 4094.
l
VLAN Priority - Configure the VLAN Priority with a value from 0 to 7.
DSCP
Setting > Network > DSCP allows you to configure the following differentiated services code point (DSCP) and quality of
service (QoS) settings:
Item Description
DSCP mode To manage network traffic, your choices are:
l
LLDP
l
Manual
When you configure the DSCP mode as Manual, you can set the following parameters:
QoS Voice
QoS Voice Signal
Assign a value using the following mapping of DSCP names and decimal values:
l
CS0: 0
l
CS1:8
l
AF11: 10
l
AF12: 12
l
AF13: 14
l
CS2: 16
l
AF21: 18
l
AF22: 20
l
AF23: 22
l
CS3: 24
l
AF31: 26
l
AF32: 28
l
AF33: 30
l
AF41: 34
l
AF42: 36
l
AF43: 38
l
CS5: 40
l
CS4: 42
l
EF: 46
l
CS6: 48
l
CS7: 56
Default:46
For details about Configuration Guidelines for DiffServ Service Classes, see
RFC4594.
FortiFone FON-x80/x80B Series 3.0.19 User Guide 28
Fortinet Inc.