Fortinet FortiGate FortiGate-100 Administration Guide

Router Route-map list entry
FortiGate-100 Administration Guide 01-28006-0003-20041105 159
Route-map list entry
Figure 74: Route map entry configuration
To configure a route map entry
1 Go to Router > Router Objects > Route Map.
2 Select the Add route-map entry icon to add a new route map entry or select the edit
icon beside an existing route map entry to edit that entry.
3 Select Permit or Deny for the Action to take for this route map entry.
Route-map entry The route map name and the ID number of this route map entry.
Action Select Permit to permit routes that match this entry. Select Deny to deny
routes that match this entry.
Match: The criteria to match.
Interface Match a route with the selected destination interface.
Address Match a route if the destination address is included in the selected
access list or prefix list.
Next-hop Match a route that has a next hop router address included in the selected
access list or prefix list.
Metric Match a route with the specified metric. The metric can be a number from
1 to 16.
Route Type Match a route that has the external type set to 1 or 2.
Tag Match a route that has the specified tag.
Set: The set criteria.
Next-hop Set the next hop router address for a matched route.
Metric Set a metric value of 1 to 16 for a matched route.
Metric Type Set a metric value of 1 to 16 for a matched route.
Tag Set a tag value for a matched route.

Fortinet FortiGate FortiGate-100 Specifications

General

Brand	Fortinet
Model	FortiGate FortiGate-100
Category	Firewall
Language	English