222 01-28006-0003-20041105 Fortinet Inc.
Default protection profiles Firewall
The IP pool list has the following icons and features.
Default protection profiles
The FortiGate unit comes preconfigured with four protection profiles.
Protection profile options
Figure 105:Adding a protection profile
You can configure the following options when creating or editing a protection profile.
Create New Select Create New to add an IP pool.
Name The start IP defines the start of an address range.
The Delete and Edit/View icons.
Note: A protection profile cannot be deleted (and the Delete icon is not visible) if it is selected in
a firewall policy or included in a user group.
Strict To apply maximum protection to HTTP, FTP, IMAP, POP3, and SMTP traffic.
You may not wish to use the strict protection profile under normal
circumstances but it is available if you have extreme problems with viruses
and require maximum screening.
Scan To apply virus scanning to HTTP, FTP, IMAP, POP3, and SMTP traffic.
Web To apply virus scanning and web content blocking to HTTP traffic. You can
add this protection profile to firewall policies that control HTTP traffic.
Unfiltered To apply no scanning, blocking or IPS. Use the unfiltered content profile if
you do not want to apply content protection to content traffic. You can add
this protection profile to firewall policies for connections between highly
trusted or highly secure networks where content does not need to be
protected.
Profile Name Enter a name for the profile. (New profiles only.)
Anti-Virus See “Configuring antivirus options” on page 223.
Web Filtering See “Configuring web filtering options” on page 223.
Web Category Filtering See “Configuring web category filtering options” on page 224.
Spam Filtering See “Configuring spam filtering options” on page 225.
IPS See “Configuring IPS options” on page 226.
Content Archive See “Configuring content archive options” on page 226.
To Next Page
Loading...
Need help?
General