Fortinet FortiGate FortiGate-100 Administration Guide

VPN ipsec vip
FortiGate-100 Administration Guide 01-28006-0003-20041105 277
config vpn ipsec vip
edit <vip_integer>
unset <keyword>
end
config vpn ipsec vip
delete <vip_integer>
end
get vpn ipsec vip [<vip_integer>]
show vpn ipsec vip [<vip_integer>]
Example
The following commands add IPSec VIP entries for two remote hosts that can be
accessed by a FortiGate unit through an IPSec VPN tunnel on the external
interface of the FortiGate unit. Similar commands must be entered on the FortiGate
unit at the other end of the IPSec VPN tunnel.
config vpn ipsec vip
edit 1
set ip 192.168.12.1
set out-interface external
next
edit 2
set ip 192.168.12.2
set out-interface external
end
This example shows how to display the settings for the vpn ipsec vip command.
get vpn ipsec vip
This example shows how to display the settings for the VIP entry named 1.
get vpn ipsec vip 1
This example shows how to display the current configuration of all existing VIP
entries.
show vpn ipsec vip
ipsec vip command keywords and variables
Keywords and variables Description Default Availability
ip <address_ipv4> The IP address of the destination
host on the destination network.
0.0.0.0 All models.
out-interface
<interface-name_str>
The name of the FortiGate interface
to the destination network.
null All models.
Note: Typing next lets you define another VIP address without leaving the vip shell.

Fortinet FortiGate FortiGate-100 Specifications

General

Brand	Fortinet
Model	FortiGate FortiGate-100
Category	Firewall
Language	English