Fortinet FortiGate FortiGate-100 - Page 364

364 01-28006-0003-20041105 Fortinet Inc.
syslogd setting Log & Report
config log syslogd setting
unset <keyword>
get log syslogd setting
show log syslogd setting
log syslogd setting command keywords and variables
Keywords and
variables
Description Default Availability
csv
{disable | enable}
Enter enable to enable the FortiGate unit
to produce the log in Comma Separated
Value (CSV) format. If you do not enable
CSV format the FortiGate unit produces
plain text files.
disable All models.
facility {alert |
audit | auth |
authpriv | clock |
cron | daemon |
ftp | kernel |
local0 | local1 |
local2 | local3 |
local4 | local5 |
local6 | local7 |
lpr | mail | news
| ntp | syslog |
user | uucp}
Enter the facility type. Also known as
message category, facility indicates from
which part of the system a log message
originated. Facility can also be used to
route messages to different files. Facility
types are described in Table 37.
local7 All models.
port
<port_integer>
Enter the port number for communication
with the syslog server.
514 All models.
server
<address_ipv4>
Enter the IP address of the syslog server
that stores the logs.
No default. All models.
status
{disable | enable}
Enter enable to enable logging to a
remote syslog server.
disable All models.