162 01-28006-0008-20041105 Fortinet Inc.
Router objects Router
Route-map list
Route maps are a specialized form of filter. Route maps are similar to access lists, but
have enhanced matching criteria, and in addition to permit or deny actions can be
configured to make changes as defined by set statements.
The FortiGate unit attempts to match the rules in a route map starting at the top of the
list. If it finds a match it makes the changes defined in the set statements and then
takes the action specified for the rule. If no match is found in the route map the default
action is deny. If no match statements are defined in a rule, the default action is to
match everything. If multiple match statements are defined in a rule, all the match
statements must match before the set statements can be used.
For a route map to take effect it must be called by another FortiGate routing feature
such as RIP.
Figure 72: Route map list
New Route-map
Figure 73: Route map name configuration
To add a route map name
1 Go to Router > Router Objects > Route-map.
2 Select Create New.
3 Enter a name for the route map.
4 Select OK.
Create New Add a new route map name.
Name The route map name.
Action The action to take for this entry in the route map.
Route-map rules The rules for a route map entry.
The Delete, Add route-map entry, and Edit icons.
To Next Page
Loading...
