Fortinet FortiGate FortiGate-800 Administration Guide

Antivirus CLI configuration
FortiGate-800 Administration Guide 01-28006-0008-20041105 319
service pop3
Use this command to configure how the FortiGate unit handles antivirus scanning of
large files and what ports the FortiGate unit virus scans for POP3 traffic.
Command syntax pattern
config antivirus service pop3
set <keyword> <variable>
end
config antivirus service pop3
unset <keyword>
end
get antivirus service [pop3]
show antivirus service [pop3]
Example
This example shows how to add antivirus scanning for POP3 traffic on ports 992 and
993. Adding more ports for scanning does not erase the default, port 110. Use the
unset command to remove all ports from the list.
config antivirus service pop3
set port 992
set port 993
end
This example shows how to display the antivirus POP3 traffic settings.
get antivirus service pop3
This example shows how to display the configuration for antivirus POP3 traffic.
show antivirus service pop3
Note: This command has more keywords than are listed in this Guide. See the FortiGate CLI
Reference Guide for a complete list of commands and keywords.
Table 29: antivirus service pop3 command keywords and variables
Keywords and variables Description Default Availability
port <port_integer> Configure antivirus scanning on a
nonstandard port number or
multiple port numbers for POP3.
You can use ports from the range
1-65535. You can add up to 20
ports.
110 All models.

Fortinet FortiGate FortiGate-800 Specifications

General

Brand	Fortinet
Model	FortiGate FortiGate-800
Category	Firewall
Language	English