Fortinet FortiGate FortiGate-800

System network Zone
FortiGate-800 Administration Guide 01-28006-0008-20041105 59
To add a zone
1 If you have added a virtual domain, go to System > Virtual Domain > Current
Virtual Domain and select the virtual domain to which you want to add the zone.
2 Go to System > Network > Zone.
3 Select Create New.
4 In the New Zone dialog box, type a name for the zone.
5 Select the Block intra-zone traffic check box if you want to block traffic between
interfaces or VLAN subinterfaces in the same zone.
6 Select the names of the interfaces or VLAN subinterfaces to add to the zone.
7 Select OK.
To delete a zone
You can only delete zones that have the Delete icon beside them in the zone list.
1 If you have added a virtual domain, go to System > Virtual Domain > Current
Virtual Domain and select the virtual domain from which to delete the zone.
2 Go to System > Network > Zone.
3 Select Delete to remove a zone from the list.
4 Select OK to delete the zone.
To edit a zone
1 If you have added a virtual domain, go to System > Virtual Domain > Current
Virtual Domain and select the virtual domain in which to edit the zone.
2 Go to System > Network > Zone.
3 Select Edit to modify a zone.
4 Select or deselect Block intra-zone traffic.
5 Select the names of the interfaces or VLAN subinterfaces to add to the zone.
6 Clear the check box for the names of the interfaces or VLAN subinterfaces to remove
from the zone.
7 Select OK.
Name Enter the name to identify the zone.
Block intra-zone
traffic
Select Block intra-zone traffic to block traffic between interfaces or VLAN
subinterfaces in the same zone.
Interface members Enable check boxes to select the interfaces that are part of this zone.