Need help?Do you have a question about the fos4X fos4Strain expert and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Sampling Rate | Up to 1 kHz |
| Power Supply | 24 VDC |
| Protection class | IP67 |
| Type | Strain sensor |
| Strain Accuracy | ±0.5% of reading ±0.5 µm/m |
| Interface | Ethernet |
Lists required PPE for tasks like handling adhesives and grinding GRP.
Covers cable data, environmental conditions, load cycles, MTBF, and mechanical data.
Highlights critical safety warnings for installation, including fiber optics and adhesives.
Details surface preparation and methods for attaching the sensor with different adhesives.
Guides on attaching the sensor cable and connecting the sensor to the system.
Addresses insufficient signal quality by recommending cleaning optical connectors.
Troubleshoots 'No Signal' by checking bending radii and 'No strain sensitivity' by checking adhesive cure.
Provides detailed steps for cleaning E-2000/APC connectors to ensure signal quality.
To Next Page