5. Installation
When working with ergo 1665 or UHU PLUS BLACK:
CAUTION
Severe irritations and allergic reactions caused by contact
with adhesive.
u
Wear protective gloves according to EN ISO 374-1 (butyl,
min. 0.5 mm).
u
Wear safety goggles with side protection according to
DIN EN 166.
u
Observe the safety data sheet of the adhesive.
CAUTION
Health damage and allergic reactions caused by inhalation of
adhesive fumes.
u
Do not inhale fumes.
u
Ensure adequate ventilation.
u
In case of insufficient ventilation: Wear respiratory
protection with protection level A2 P2 according to
DIN EN 140.
u
Observe the safety data sheet of the adhesive.
5.2 Preparing the Installation Position
CAUTION
Respiratory irritation and health damage due to inhalation of
GRP dust.
u
Wear respiratory protection with protection level A2 P2
according to DIN EN 140.
u
Ensure adequate ventilation.
Material and equipment
Table 9: Material and equipment
Name Type Quantity
Cleaning cloth Dry, lint-free 1
Angle grinder 1
Grinding wheel for angle
grinder
Grit 80 1
© fos4X 2019 4-10_1.3.x_4.0_fos4Strain expert-en-us 21 / 42
To Next Page
Loading...
Need help?
General