fos4X fos4Strain expert User Manual

2. Safety
2.3 Intended Use
The sensor fos4Strain expert is optimized for use on GRP or CFRP in rotor blades.
For the use of the fos4Strain expert on other substrates, qualified personnel from
fos4X must be consulted.
Any other use or use going beyond this is considered improper use.
2.4 Residual Risks
2.4.1 Explosion Protection
The product is not suitable for use in potentially explosive environments.
2.4.2 Working Environment Blade Manufacturing Facility
The use of the product in blade manufacturing facilities requires special risk prevention
measures.
Risk prevention measures in blade manufacturing facilities:
u
Obtain and observe safety and work regulations:
– Qualification and training of personnel
– Personal protective equipment
– Required permits
u
Ensure that the use of the product is permitted on the wind turbine.
2.4.3 Working Environment Wind Turbine
The use of the product in wind turbines requires special risk prevention measures.
© fos4X 2019 4-10_1.3.x_4.0_fos4Strain expert-en-us 9 / 42

fos4X fos4Strain expert Specifications

General

Brand	fos4X
Model	fos4Strain expert
Category	Accessories
Language	English