2. Safety
Measures for risk prevention on wind turbines:
u
Obtain and observe safety and work regulations:
– Qualification and training of personnel
– Personal protective equipment
– Required permits
u
Ensure that the use of the product is permitted on the wind turbine.
2.4.4 Adhesives
Adhesives can cause severe irritation and allergic skin reactions.
u
Avoid skin contact.
u
Observe the safety data sheet of the adhesive.
u
Use personal protective equipment according to the safety data sheet of the
adhesive. See Personal Protective Equipment, page 10.
Fumes from adhesives can cause damage to health and allergic reactions.
u
Do not inhale fumes.
u
Observe the safety data sheet of the adhesive.
u
Use adhesives only in sufficiently ventilated rooms.
Adhesives can cause severe environmental damage.
u
Observe the safety data sheet of the adhesive.
u
Dispose of adhesives and adhesive packaging in accordance with applicable
environmental regulations.
2.5 Personal Protective Equipment
Protective Gloves
For all tasks where surfaces are heated:
u
Wear protective gloves with the following characteristics:
– General requirements according to DIN EN 420
– Protection against contact heat: Performance level 2 according
to DIN EN 407
10 / 42 4-10_1.3.x_4.0_fos4Strain expert-en-us © fos4X 2019
To Next Page
Loading...
Need help?
General