fos4X fos4Strain expert - 6 Commissioning and Operation

6. Commissioning and Operation
6 Commissioning and Operation
Commissioning
If the sensor is used in a fos4X measuring system:
u
Enter the serial number of the sensor into the system via the web-interface. See
manual of the web-interface.
Operation
In normal operation of the fos4Strain expert no operating actions are necessary.
u
Monitor the operation status with the measuring device. See instructions for use
of the measuring device.
In case of errors see Troubleshooting, page 36.
© fos4X 2019 4-10_1.3.x_4.0_fos4Strain expert-en-us 35 / 42