8. Maintenance
3. Attach a dust cap (5) on the socket (4).
4. Carefully open the protective cover (3) on the connector (2).
5. Clean the connector (2) with an optical connector cleaner. See manual of the
optical connector cleaner.
6. Close the protective cover (3).
7. Remove the dust cap (5) from the socket (4).
8. Clean the sockets (4) with an optical connector cleaner. See manual of the optical
connector cleaner.
9. Connect the connector (2) to the socket (4).
P
The connector (2) snaps into the socket (4) with a clicking sound.
P
E-2000/APC connection is cleaned.
10. Repeat the procedure for all connections.
38 / 42 4-10_1.3.x_4.0_fos4Strain expert-en-us © fos4X 2019
To Next Page
Loading...
Need help?
General