Foscam C2E - More Function

14
2.9. More Function
1. Tap the Foscam icon on your mobile device.
2. Tap Live .
3. Tap More to display more fuction.
4. As default, Motion Detection and Soud Detection are enable, You can disable the
alarm setting. If you need to set the Sensitivity, Trigger Interval and schedule, please
refter to Alarm Setting.
5. On this page, you can enable/disable the IR LED, and set the IR auto switch or
you can schedule it, please refter to IR LED Schedule.
Auot: As default, the IR-Cut auto switch is ON, it means that the IR LED will be OFF
during 9:00~18:00, and the IR LED will be ON at the other time.
Day: it means that the IR LED will be OFF all the time.
Night: it means that the IR LED will be ON all the time.
Schedule: You can schedule the time to turn the IR LED OFF/ON.
6. You can rotation the image by tapping .