NVR User Manual
www.foscam.com
2.4.1 Adding Devices
Right-click in live view mode and select Adding Devices from the Shortcut Menu, or select Menu >
Adding Devices in the Menu interface. The Adding Devices interface is displayed.
You can search and add the online IP cameras by following the operation. After adding IP cameras,
the basic information of the camera lists in the IP Camera List, and you can configure the basic
setting of the IP cameras.
Note
Before adding the IP Camera, make sure that the IP Camera supports FS or ONIVF protocol. And
you have the username, password and port number of the IP camera.
NVR will automatically detect all the online IP Cameras which they can connect to. You will need to
know your IP Camera name and password to connect.
Automatic Adding IP Camera
If the camera connected camera which is equipmented in the package.You can automatically add
the camera to your NVR. Check the Automatic adding IP camera checkbox. The NVR system will
automatically synchronize its password with the Manually adding IP Camera.
Manually Adding IP Cameras
If the connected camera which is not the equipmented in the package. You can manually add the
To Next Page
Loading...
Need help?
General