EasyManuals Logo

Foscam FN7108E-B4-2T User Manual

Foscam FN7108E-B4-2T
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
NVR User Manual
www.foscam.com
50
2Click the Search button to list all matched logs.
3.4.5 Basic Settings
System Time
You can configure the date and time of the NVR.
Step1 Choose (Parameter Configuration) > Basic Settings > System Time. The System
Time page is displayed.
Step2 Configure the system time of the NVR.
Step3
Select the Time Zone from the drop-down list.
Step4 If you check the Synchronize Time To Camera checkbox, the default settings of the NVR for
the IP camera is applied to the added camera.
Step5 Configure the system date and time.
If you check the Automatically Synchronize With Internet Time Server checkbox, a Network
Time Protocol (NTP) Server can be configured on your NVR to ensure the accuracy of system
date / time. Choose the one that is closest to your NVR.
If you uncheck the Automatically Synchronize With Internet Time Server checkbox, configure
the following NTP settings.
Parameter
Description
System Time
There are two different ways for the date format to synchronize the date
and time of the NVR.
input the date and time manually. .

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Foscam FN7108E-B4-2T and is the answer not in the manual?

Foscam FN7108E-B4-2T Specifications

General IconGeneral
BrandFoscam
ModelFN7108E-B4-2T
CategoryCctv systems
LanguageEnglish