NVR User Manual
www.foscam.com
Important Safety Instructions
This chapter describes how to use the product properly so as to prevent danger and property loss. Be
sure to follow the security instructions when operating this product.
Installation Environment
Ensure device is installed in the well-ventilated, dust-free environment.
It is recommended to use a voltage stabilizer for supply of power. If the power supply was unmatched,
the device might work abnormally or stop working.
Check that the voltage of the extra power supply is the same with the NVR's requirement, and the
ground connection is working properly.
The distance between the NVR and other device or wall should be more than 6cm away to facilitate
heat dissipation.
Precautions
Please keep the device horizontally and avoid inclination or inversion.
Don't touch the power switch with wet hand or damp items to avoid shock.
Do not splash liquid or metal filing on the NVR To avoid short-circuit fault or blaze.
The NVR does not contain any storage device. Please install a hard disk or connect to storage
device firstly. Otherwise, you cannot perform operations such as recording and playback.
Please press power button to shut down the NVR instead cutting off the power directly to avoid to
damaged the storage device.
Do not take the device apart when it is operating (or connecting to power).
To Next Page
Loading...
Need help?
General