NVR User Manual
www.foscam.com
3.4 Parameter Configuration
Choose (Parameter Configuration), you can configure the Local Settings, Settings, Service
Configuration, User Management, System Management and so on.
3.4.1 IP Camera Setup
NVR provide a function of auto searching IP camera. When there are supplied IP cameras in the
same network segment of a LAN with NVR, you may add it in one button with IP Camera's user
name, password and port number.
Choose (Parameter Configuration) > Adding Device. The IP Camera Setup page is
displayed.
[Auto Adding IPC]
Check the Automatically search for and add all devicescheckbox if the connected cameras which
are equipmented in the package. And make sure you can view all connectedcameras are in The
Current LAN IPC List box. The NVR system will automatically synchronize its password with the
cameras. Then you can see the videos of the cameras on the Realtime Preview of the NVR.
[Manually Adding IPC]
If the connected cameras which are not the equipmented in thepackage, you can uncheck the
Automatically search for and add all devices checkbox to manually add the other cameras. After
select any one of the channels, input information of the IPC. Then click Add button to finish adding.
To Next Page
Loading...
Need help?
General