NVR User Manual
www.foscam.com
Step1 Select one channel from Channels.
Step2 Choose the IP Camera in the list of 'The Current LAN IPC List' .
Choose the Protocol from the drop list. Input the Username and Password of the IPC.
Select the FS protocol for Foscam brand IPC, and select the ONVIF protocol for other brands
IPC.
Step3 Click Add button to finish adding.
-------End
3.4.2 Schedule Record
You can enable or disable schedule recording for the every channel.
Set the recording schedule, and then the NVR automatically starts / stops recording according to the
configured schedule. The recording files will be save to the HDD or mobile store device.
The Icon indicate starts schedule recording at the right bottom of the screen for certain
channel.
Step1 Choose (Parameter Configuration) > Schedule Record. The Schedule page is
displayed.
Step2
Select channel from drop-down box list.
Step3 Enable the Enable schedule record.
Step4
Set Recording schedule time of the channel.
You can choose a week, one day of a week, the certain time period for the recording.
For detailed procedure, please refer to 3.4.3 Alarm Motion Detection.
Step5 Click Save button to take effect.
-------End
To Next Page
Loading...
Need help?
General