NVR User Manual
www.foscam.com
3
Web
You can access and manage the NVR on a PC through Web browser.
3.1 Instructions before Login
Before accessing the NVR Kit by using the Web browser, you need to obtain the following
information:
The NVR and the PC must be connected to the same LAN and are in the same network segment.
You can query or allocate the IP address of the NVR by using the following methods:
Through operation on the local GUI, configure an IP address for the NVR. For the specific
operation, please refer to 4.2 Common Operations 2. Configure the IP Parameters.
Allocate an IP address for the NVR through a router.
This product supports 32-bit IE8 or later versions and does not support 64-bit IE browsers. It also
supports Apple Safari.
3.2 Login
Step1 Log in to the Web client of the NVR. You can directly enter the IP address and port in the
browser or search out the NVR by using the search tool. Here we take search tool as an
example.
Step2 Visit Foscam official website http://www.foscam.com , select “Support > Download Center >
Software Tools”, then you can find the “Equipment Search Tool”, download the tool to your
computer, the icon shows as below:
Shortcut icon for Windows / Mac OS
Step3 Enable the DHCP feature of your router, then open the Equipment Search Tool program. It
should display the NVR's IP address in your LAN.
To Next Page
Loading...
Need help?
General