NVR User Manual
www.foscam.com
Factory Reset
Choose Menu > System in the Menu interface, then click Factory Reset in the System interface.
Click OK button in the pop-up message box and all parameters will return to factory settings. Click
OK button and then the NVR device will reboot automatically.
Para Export
Choose Menu > System in the Menu interface, then click Para export in the System interface. You
can import or export a configuration file for NVR system.
[Config Export]
It is used to save your current settings. It is recommended to backup your configuration before
modifying or upgrading firmware.
Click Config Export, and then click OK button in the pop-up message box. The configuration files of
the NVR will be exported to USB-flash disk for backup. The name of the configuration file name is
config.bin.
[Config Import]
Click Config Import, and then click OK button in the pop-up message box. The configuration file
from the USB-flash disk will be import.
The loading process takes about 50 seconds, After having finished the import of configuration files,
the NVR device will reboot automatically.
Note
Do not disturb the update process by turning off the power.
All current settings will be overwritten when importing a configuration file. If a bad configuration
file is uploaded the NVR may not work.
Auto Restore
Choose Menu > System > Auto Restore in the Menu interface. The Auto Restore interface is
displayed.
You can configure the Date and Time. The NVR will maintain system at the setting time.
Log Out
After logging out, the monitor turns to the live view mode and if you want to do some operation, you
To Next Page
Loading...
Need help?
General