NVR User Manual
www.foscam.com
2.4.9 Shutdown
Right-click in live view mode select Shutdown to enter the Shutdown interface. You can restore,
logout, reboot or shutdown the NVR system.
Click Restore,The Restore factory settings interface is displayed. You can check some
information to restore the factory settings, as shown in the figure below.
Note
Each model is slightly different, please refer to the actual interface.
2.5 Main Menu
Right-click in live view mode and select Main Menu from the Shortcut Menu, the Main Menu
interface is displayed.
To Next Page
Loading...
Need help?
General
