NVR User Manual
www.foscam.com
If you want to set other channels to be the same, you can select the "Copy To" , then click Copy
button.
2.5.9 Restore factory settings
Right-click in live view mode and select “Main Menu > Restore factory settings” in the Main Menu
interface. The Restore factory settings interface is displayed. On this page you can choose which
you can restore the factory settings.
2.5.10 Upgrade
You can upgrade your NVR system with local Software.
Step 1: Download the firmware to the USB flash drive.
Step 2: Insert USB flash drive to the USB port located at the rear of your NVR.
Step 3: Right-click in live view mode and select “Main Menu > Upgrade” in the Main Menu
interface.
Step 4: Click Refresh button in the Upgrade interface.
Step 5: Select the firmware from the USB flash drive.
Step 5: Click Upgrade to upgrade your NVR.
To Next Page
Loading...
Need help?
General
