NVR User Manual
www.foscam.com
1----- SMTP server/ Port Enter SMTP server for sender. SMTP port is usually set as 25.
Some SMTP servers have their own port, such as 587 or 465, and Transport Layer
Security usually is None. If you use Gmail, Transport Layer Security must be set to TLS or
STARTTLS and SMTP Port must be set to 465 or 25 or 587, which port you choose should
be decided by which Transport Layer Security you select.
2----- SMTP account/ password ID account and password of the sender email address
3----- Recipient mail 1 Mailbox for receiver need not support SMTP, you can set 4
receivers.
4----- Save Click Save to take effect.
4.5.2 Device Manager
IP camera setup
You can add the camera for the NVR device on this page.
Select the channel in the channel list box, enter the device information, click the add
button, and the system will prompt for success.
To Next Page
Loading...
Need help?
General
