NVR User Manual
www.foscam.com
Step 3: Select the Event Trigger. You can choose the following alarm triggering methods: Record
Channel, Tour, PTZ Activation, Send Email, Buzzer. If you want to set other channels to be the same,
you can select the "Copy To" , then click Copy button.
Step 4: Click Save button to take effect.
Video Loss
Click Video Loss to enter the Video Loss interface. When there is no video in the channel, the NVR
alarm function is triggered. On this page you can setting Channel, Schedule, and Event Trigger.
To Next Page
Loading...
Need help?
General
