NVR User Manual
www.foscam.com
Video Loss
When the video is lost, you can set an alarm message.
To enable motion detection, follow the steps below:
1 Channel---- Select the channel.
2 Action
If you want to receive alarm emails when video loss, you must select Send E-mail and set Mail
Settings first. Make sure you have set E-mail in “Device Setting -> Basic -> Mail” interface.
If you select this checkbox, when the video has been loss, the NVR will alert the buzzer.
OSD
This page is used to add time and device name on the video.
To Next Page
Loading...
Need help?
General
