Foscam IP Camera - Get MJStream; Get OSD Setting; Set OSD Setting

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
8
GetMJStream
Function
Get motion jpeg stream
privilege
visitor
Usage
/cgi-bin/CGIStream.cgi?cmd=GetMJStream
Param
None
Return
Motion jpeg stream data
Note
1) Motion jpeg stream data is returned from http server by a serverpush mode
2) MJ stream is VGA resolution @ 15fps
Example
/cgi-bin/CGIStream.cgi?cmd=GetMJStream&usr=admin&pwd=
getOSDSetting
Function
Get OSD config
privilege
visitor
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getOSDSetting
Param
None
Return
isEnableTimeStamp
Time stamp will display on screen or not
isEnableDevName
Camera name will display on screen or not
dispPos
OSD display position, currently can only be 0
isEnableOSDMask
Is OSD mask effective
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=getOSDSetting&usr=admin&pwd=
setOSDSetting
Function
Set OSD config
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=setOSDSetting
Param
isEnableTimeStamp
Time stamp will display on screen or not
isEnableDevName
Camera name will display on screen or not
dispPos
OSD display position, currently can only be 0
isEnableOSDMask
Is OSD mask effective
Return
None
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=setOSDSetting&isEnableTimeStamp=1&isEnable
DevName=1&dispPos=0&isEnableOSDMask=0&usr=admin&pwd=