Foscam IP Camera - Miscellaneous Functions; Get Firewall Config; Set Firewall Config; Get Log

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
48
MISC
getFirewallConfig
Function
Get firewall config
privilege
visitor
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getFirewallConfig
Param
None
Return
isEnable
Use firewall or not
rule
0
The ip list can’t access
1
Only allow the ip list to access
ipListN
The ip address(Network address) of list N
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=getFirewallConfig&usr=admin&pwd=
setFirewallConfig
Function
Set firewall config
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=setFirewallConfig
Param
isEnable
Use firewall or not
rule
0
The ip list can’t access
1
Only allow the ip list to access
ipListN
The ip address(Network address) of list N
Return
None
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=setFirewallConfig&isEnable=1&rule=0&ipList0=0
&ipList1=0&ipList2=0&ipList3=0&ipList4=0&ipList5=0&ipList6=0&ipList7=0&us
r=admin&pwd=
getLog
Function
Get system log
privilege
visitor