Foscam IP Camera - Get Osd Mask Area; Set Osd Mask Area; Get Motion Detect Config

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
9
getOsdMaskArea
Function
Get OSD mask area info
privilege
visitor
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getOsdMaskArea
Param
None
Return
x1_N
The top left X position of mask N
y1_N
The top left Y position of mask N
x2_N
The bottom right X position of mask N
y2_N
The bottom right Y position of mask N
Note
Our device can only support 4 mask areas
Example
/cgi-bin/CGIProxy.fcgi?cmd=getOsdMaskArea&usr=admin&pwd=
setOsdMaskArea
Function
Set OSD mask area info
privilege
admin
Usage
/cgi-bin/CGIProxy.fcgi?cmd=setOsdMaskArea
param
x1_N
The top left X position of mask N
y1_N
The top left Y position of mask N
x2_N
The bottom right X position of mask N
y2_N
The bottom right Y position of mask N
Resturn
None
Note
Our device can only support 4 mask areas
Example
/cgi-bin/CGIProxy.fcgi?cmd=setOsdMaskArea&x1_0=100&y1_0=100&x2_0=2
00&y2_0=200&x1_1=0&y1_1=0&x2_1=0&y2_1=0&x1_2=0&y1_2=0&x2_2=0
&y2_2=0&x1_3=0&y1_3=0&x2_3=0&y2_3=0&usr=admin&pwd=
getMotionDetectConfig
Function
Get motion detect config
privilege
visitor
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getMotionDetectConfig
Param
None
Return
isEnable
Is enable motion detect alarm
linkage
Motion alarm linkage
( bit3 | bit2 | bit1 | bit0 )
bit0:Ring
bit1:Send mail