Foscam IP Camera User Manual

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
31
Note
Only supported by ipc that can enable 485
Example
/cgi-bin/CGIProxy.fcgi?usr=admin&pwd=&cmd=set485Info&rs485Protocol
=0&rs485Addr=1&rs485Baud=1200&rs485DataBit=7&rs485StopBit=1&rs4
85Check=0
get485Info
Function
Get informations of 485
privilege
Visitor
Usage
/cgi-bin/CGIProxy.fcgi?cmd=get485Info
Param
None
Return
rs485Protocol
Protocol
rs485Addr
Address
rs485Baud
Baud rate
rs485DataBit
DataBit
rs485StopBit
StopBit
rs485Check
Parity
Note
Only supported by ipc that can enable 485
Example
/cgi-bin/CGIProxy.fcgi?usr=admin&pwd=&cmd=get485Info
Network
getIPInfo
Function
Get IP Info
privilege
visitor
Usage
/cgi-bin/CGIProxy.fcgi?cmd=getIPInfo
Param
None
Return
isDHCP
Obtain ip from dhcp server or not
ip
ip address(Can only support ipv4 yet)
gate
gateway(“0.0.0.0” when use dhcp)
mask
subnet mask
dns1
The first dns server addr(“0.0.0.0” when use dhcp)
dns2
The second dns server addr(“0.0.0.0” when use dhcp)
Note
Example
/cgi-bin/CGIProxy.fcgi?cmd=getIPInfo&usr=admin&pwd=

Foscam IP Camera Specifications

General

Brand	Foscam
Model	IP Camera
Category	IP Camera
Language	English