Foscam IP Camera - Set PTZ Pre Point For Self Test; Get PTZ Pre Point For Self Test; Set 485 Info

Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
30
Note
Only supported by ipc that can enable ptz-selftest
Example
/cgi-bin/CGIProxy.fcgi?usr=admin&pwd=&cmd=getPTZSelfTestMode
setPTZPrePointForSelfTest
Function
Set presetpoint for selftest of PTZ
privilege
operator
Usage
/cgi-bin/CGIProxy.fcgi?cmd= setPTZPrePointForSelfTest
Param
name
Preset point name
Return
None
Note
Only supported by ipc that can enable ptz-selftest-2
Example
/cgi-bin/CGIProxy.fcgi?usr=admin&pwd=&cmd=setPTZPrePointForSelfTes
t&name=TopMost
getPTZPrePointForSelfTest
Function
Get the presetpoint for selftest of PTZ
privilege
visitor
Usage
/cgi-bin/CGIProxy.fcgi?cmd= getPTZPrePointForSelfTest
Param
None
Return
name
Preset point name
Note
Only supported by ipc that can enable ptz-selftest
Example
/cgi-bin/CGIProxy.fcgi?usr=admin&pwd=&cmd=getPTZPrePointForSelfTes
t
set485Info
Function
Set informations of 485
privilege
operator
Usage
/cgi-bin/CGIProxy.fcgi?cmd=set485Info
Param
rs485Protocol
Protocol
rs485Addr
Address
rs485Baud
Baud rate
rs485DataBit
DataBit
rs485StopBit
StopBit
rs485Check
Parity
Return
None