Foscam IPCamera CGI User Guide
Copyright@ Shenzhen Foscam Intelligent Technology Limited
can trigger again when a motion
detection has happened.
The motion alaram schedule of one week,
N = 0(Monday) ~6(Sunday)
For detail, see *1 bellow
The area info of row N
For detail, see *2 bellow
·Video region is divided into 10*10 sub areasideo region is divided into 10*10
sub areas
·The min unit of schedule is half an hour
/cgi-bin/CGIProxy.fcgi?cmd=setMotionDetectConfig&isEnable=1&linkage=16&
snapInterval=2&sensitivity=1&triggerInterval=5&schedule0=1024&schedule1
=1024&schedule2=1024&schedule3=1024&schedule4=1024&schedule5=102
4&schedule6=1024&area0=1024&area1=1024&area2=1024&area3=1024&ar
ea4=1024&area5=1024&area6=1024&area7=1024&area7=1024&area8=1024
&area9=1024&usr=admin&pwd=
*1 schedule bitmap
Each grid of a row presents half of an hour of one day. For example, 40 presents 20:00
~20:30.
The bit 40 set to “1” means the motion detection is effective between 20:00 to 20:30
*2 area bitmap
To Next Page
Loading...
Need help?
General
