EasyManuals Logo

Foscam R2 User Manual

Foscam R2
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
21
4 Advanced Camera Settings
Click the button “Settings, goes to Administrator Control Panel to make advanced camera settings.
4.1 Setup Wizard
Please go to section 3.2 to find the way to set it.
4.2 Status
Status contains four columns: Device Information, Device Status, Session Status and Log, it will show
you various information about your camera.
4.2.1 Device Information
Camera Model: The camera model NO.
Camera Name: The Device Name is a unique name that you can give to your device to help you identify
it. Click Basic Settings and go to Camera name panel where you can change your camera name. The
default device name is anonymous.
Camera ID: Display the wired MAC address of your camera. For example Device ID is 000C5D00008,
the same MAC ID sticker is found at the bottom of the camera.
Camera Time: The system time of the device. Click Basic Settings and go to Camera time panel and
adjust the time.
System Firmware Version: Display the System Firmware version of your camera.
Application Firmware Version: Display the application firmware version of your camera.
Plug-In Version: Display the plug-in version of your camera.
4.2.2 Device Status
On this page you can see device status such as Alarm status/ Record Status ,DDNS status ,WIFI status

Other manuals for Foscam R2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Foscam R2 and is the answer not in the manual?

Foscam R2 Specifications

General IconGeneral
TypeIP security camera
PTZ controlYes
Antenna typeExternal
Antennas quantity1
Placement supportedIndoor
Connectivity technologyWired & Wireless
Form factorCube
Mounting typeDesk
Product colorWhite
Full HDNo
Total megapixels2 MP
Maximum resolution1920 x 1080 pixels
Video formats supportedH.264
Minimum illumination0 lx
Sensor typeCMOS
Optical sensor size1/3 \
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size64 GB
Night vision distance8 m
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
InterfaceRJ-45
Power over Ethernet (PoE)-
Power consumption (typical)4.8 W
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)20 - 85 %
Harmonized System (HS) code85258900
Weight and Dimensions IconWeight and Dimensions
Width70 mm
Height120 mm

Related product manuals