Foscam R2 User Manual

2
 Support image snapshot
 Support dual-stream
 Support SD Card storage up to 64GB
 Support IR-Cut auto switch
 Embedded free FOSCAM DDNS(dynamic domain name service) Service
 Supporting the Third Party Domain Name Service
 Support two-way audio
 Support ONVIF protocols
 Multi-level users management with password protection
 Motion detection alert via email or upload image to FTP
 Provide free Android and iPhone APP for viewing live video provide free Central Management
Software to manage and monitor multiple cameras
 Support record schedule
 Supports Wide Dynamic Range
 Supports Magic zoom
 Supports voice prompt
1.2 Read Before Use
Please first verify that all contents received are complete according to the Package Contents listed below.
Before the IP Camera is installed, please carefully read and follow the instructions in the Quick Setup
Guide to avoid damage due to faulty assembly and installation. It also ensures the product is used
properly as intended.
1.3 Package Contents
● IP Camera × 1
● Power Supply × 1
● Quick Setup Guide × 1
● Warranty Card × 1
● Mounting bracket×1
● Wi-Fi Antenna×1
1.4 Physical Description
Front panel Rear panel

Foscam R2 Specifications

General

Type	IP security camera
PTZ control	Yes
Antenna type	External
Antennas quantity	1
Placement supported	Indoor
Connectivity technology	Wired & Wireless
Form factor	Cube
Mounting type	Desk
Product color	White
Full HD	No
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Video formats supported	H.264
Minimum illumination	0 lx
Sensor type	CMOS
Optical sensor size	1/3 \
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	64 GB
Night vision distance	8 m
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Interface	RJ-45
Power over Ethernet (PoE)	-
Power consumption (typical)	4.8 W
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	20 - 85 %
Harmonized System (HS) code	85258900

Weight and Dimensions

Width	70 mm
Height	120 mm