Foscam R2 User Manual

58
The default storage path of alarm record files is SD card, when the available size of SD card is less than
256M, the old record files will be deleted automatically.
SD Card Management: After click the button, you should enter the username and password of the
camera. Then you can manage the recording files of the camera in the SD card. The SD card
management is only effective when access the camera in LAN.
Format: Click the button, you can format the SD card. Note that this will delete all files on the SD card.
4.8 PTZ
This page will allow you to change the pan/tilt speed and do cruise tracks settings.
4.8.1 Pan & Tilt Speed
There are five Pt speed types: very fast, fast, normal, slow and very slowly. Select the desired PTZ
speed type and click save button.
There are three zoom speed types: fast, normal, slow.
4.8.2 Cruise Settings
This section explains how to add/ delete/ alter one cruise track.

Foscam R2 Specifications

General

Type	IP security camera
PTZ control	Yes
Antenna type	External
Antennas quantity	1
Placement supported	Indoor
Connectivity technology	Wired & Wireless
Form factor	Cube
Mounting type	Desk
Product color	White
Full HD	No
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Video formats supported	H.264
Minimum illumination	0 lx
Sensor type	CMOS
Optical sensor size	1/3 \
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	64 GB
Night vision distance	8 m
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Interface	RJ-45
Power over Ethernet (PoE)	-
Power consumption (typical)	4.8 W
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	20 - 85 %
Harmonized System (HS) code	85258900

Weight and Dimensions

Width	70 mm
Height	120 mm