Delete: Select one cruise track and delete it.
Save: After you modify the Dwell time, you should click Save button to take effect.
Example
How to do add cruise tracks ?
Firstly, Click Add button and enter a descriptive name to identify the cruise track.
Secondly: On the lower left of the page, you can see all preset points you have added. Select one
preset point and click Add button, you can see the preset point has been added to the cruise track on the
cruise track page. You need to add two or more preset points to the cruise track.
Thirdly: Click OK button and the cruise track will take effect.
You can add other cruise track as the same method.
For example: I have added three preset points to the “track 1”, that means : When I select the “track 1”
on the surveillance window, the camera moves as the following track: upright then Right Most last down
left.
You can add preset on the left of the surveillance window.
The new added track name.
1 Select one preset point.
Here you can see the preset point
has been added to one track. And
you can set the stay time.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
